Physical Description

The front of Pocket has the following item:

1. Power LED;

Front view Pocket

On the back of Pocket are:

1. DC power input (5V);
2. LAN network reset. This button has two effects depending on how long you press it (use a pin or something);
3. LAN connector 1 RJ-45 Ethernet 10/100;

Rear view Pocket

LAN reset

For cases where there is no DHCP on the network (automatic IP address assignment), you can set a specific IP address. pocket has a network reset button on the back, between the power input and the network input, which can be pressed with a pin or something like that. This reset button has two effects depending on how long you press it:

• 02 (two) seconds: resets the network to DHCP (default operation).

• 10 (ten) seconds; resets the network to the following configuration:

  • Static IP: 192.168.0.252
  • Netmask: 255.255.255.240

On the back of Pocket there is a label with the serial number of the device.

Label affixed to the bottom of the Pocket

Attention

Attention: There are no internal parts that can be serviced by the user. Any maintenance and repair work must be carried out exclusively by Dinamo Networks. Breaking or tampering with the seals on the side and bottom of DINAMO will be considered a security breach and will result in the loss of the equipment's warranty.